BIOFORM®Micronutrient Bacterial Booster_Bio-Form Biotechnology (Guangdong) Co., Ltd.

HOME > Product > Microbial Agent > Sewage Treatment > nutrition and detoxification >

BIOFORM®Micronutrient Bacterial Booster

Proper biological activity is often a function of the nutrients available to sustain and develop healthy biological populations.
BIOFORM® Micronutrient Bacterial Booster is designed to provide the essential micronutrients to supplement bacteria's basic metabolic needs. And it fulfills the micronutrient need in both the aerobic and anaerobic environments. The components of the product are all natural and non-processed, readily soluble components.
In waste treatment facilities where results are vital, and where nutrient deficiencies are present, BIOFORM® Micronutrient Bacterial Booster is proven at increasing and
sustaining bacterial activity.

Stabilize biological populations in toxic and nutrient deficient conditions.
Reduce plant sensitivity to events which may otherwise cause upset.
Aids for smooth plant start up.
Controls foaming and bulking caused by nutrient deficient conditions.
Works in aerobic and anaerobic environments.

Scope of application

Suitable for all kinds of complex and less biodegradable industrial wastewater, such as pharmaceutical wastewater, pesticide wastewater, refinery petrochemical wastewater, coking wastewater, circuit board wastewater and printing and dyeing wastewater

Description Of Products

Product composition

Amino acids, minerals, vitamins, trace elements, etc.

Product characteristics and specifications

Aluminum foil bag packaging, liquid and solid products should be free of obvious impurities, solid products should have water absorption.

The net weight is 454 grams.

Expiration date

The expiration date of the product is 2 years if the storage and transportation conditions are up to specification, the packaging are complete, the seal is not opened.

Storage method

This product should be stored in a cool, dry and ventilated warehouse, shall not be deposited in the open air to prevent the rain, humidity, sunlight and high temperature over 40℃. Storage with toxic, harmful and corrosive substances is strictly prohibited.

Use instructions

Method of use

Stir and activate the product proportionally (one bag of product mixed with 10L water) with water. Dosage: According to the calculation of 0.5-1% of COD load in water inlet, daily addition during the inoculation period. The detailed usage is in accordance with the specific scheme provided by BIOFORM.

Operation parameter

If there are any special cases, please communicate with our professional staff before using. Special cases include but are not limited to the large amount of toxic substances, unknown organisms and high concentration in water quality.

The test results show that the following physical and chemical parameters are more effective for bacterial growth:

pH: the ideal pH value is 7.0-8.0

Temperature: the ideal temperature value is 26-32℃.

Dissolved oxygen: the dissolved oxygen in anaerobic tank is less than 0.2 mg/L, the dissolved oxygen in anoxic tank is 0.5 mg/L, and the dissolved oxygen in aerobic tank is 2-4 mg/L.

Trace elements: many elements such as potassium, iron, calcium, sulfur, and magnesium, are required for the growth of a proper family of bacteria. Usually the soil and water source will contain the above sufficient amount of elements.

Salinity: applicable to both sea water and fresh water and can withstand salinity up to 40‰

Poison resistance: effectively resist chemical toxic substances, including chloride, cyanide and heavy metals

Note: when microbicides are present in contaminated areas, their effects on microorganisms should be studied in advance.