BIOFORM® Water-Reform_Bio-Form Biotechnology (Guangdong) Co., Ltd.

Description Of Products

Number of effective live bacteria

Number of effective live bacteria≥2×108cfu/g

Product characteristics and specifications

Aluminum foil bag packaging, liquid and solid products should be free of obvious impurities, solid products should have water absorption. The net weight is 227 grams.

Expiration date

The expiration date of the product is 2 years if the storage and transportation conditions are up to specification, the packaging are complete, the seal is not opened.

Storage method

This product should be stored in a cool, dry and ventilated warehouse, shall not be deposited in the open air to prevent the rain, humidity, sunlight and high temperature over 40℃. Storage with toxic, harmful and corrosive substances is strictly prohibited.

Use instructions

Note

After using BIO-FORM products, all the oxygenation devices will be started within 24 hours. It is better to ensure that the dissolved oxygen of water reaches more than 4mg/l. For particularly polluted water, it is better to use BIO-FORM ® Bio-Aqua product at intervals after using BIO-FROM® Water-Reform product. Do not use disinfectant, antibacterial or strong oxidizer for 4 days before and after the use of BIO-FORM products.

Method of use (water depth 1.5m)

1）Activation: take a bucket (10 kilograms volume) of the original pond water to stir and dissolve this product, hand stirring to be fully dissolved into more original pond water and evenly sprinkled in the pool.
2）Usage time: optimal time from 9:00 a.m. to 1:00 p.m., do not after 4:00 p.m.
3）Usage: Treatment of "black water", "red water" and other bad water, remove harmful algae: The dosage is 50-60g/mu(666m2). If serious, it can be used again 4 days after the first use. The effect is better and more thorough. Also refer to the following notes.To control blue algae and treat the culture pond sediment at its early stage, the dosage is 100g/mu(666m2).Treat the culture pond sediment daily, and improve the water quality.
4）Maintain water quality and color daily：

Attention: In the aquaculture model of BIO-FORM, there are much more bait and heavy pollution in summer. We should use more dosage of BIO-FORM® Water-Reform product to eliminate algae and clear the bottom, and reduce the dosage of BIO-FORM® Water-Reform product to 20 grams per mu(666m2).But in winter, light pollution and less algae, we should increase the amount of 30 g per mu(666m2) of BIO-FORM® Water-Reform product for increase algae and stabilize water quality, and reduce the dosage of BIO-FORM® Water-Reform product.
Determine specific dosage according to the local farming mode, please consult BIO-FORM technical department or reference the operating instruction manual of BIO-FORM.

Operation parameter

pH: the ideal pH value is 6.0-8.5; Temperature: 10-32℃; Dissolved oxygen: more than 4 mg/L; Salinity: applicable to both sea water and fresh water and can withstand salinity up to 40‰