BIOFORM®Anaerobic Digesters

BIOFORM®Anaerobic Digesters contain efficient microbial strains which suitable for waste water or solid waste anaerobic treatment. It improve the resistant ability of microbes in the anaerobic phase, the efficiency of anaerobic, and notably the degradation of material in vegetable oils or animal fat. In addition, BIOFORM®Anaerobic Digesters is also compounded with ingredients that can change the surface activity, permeability and other properties, so as to liquefy the oil, so as to help the microorganism to degrade the lipids of animals and plants. BIOFORM®Anaerobic Digesters is harmless to human, animal, plant and environment, and can be biodegradable and absorbed.
BIOFORM®Anaerobic Digesters screening extracted from the nature of efficient facultative anaerobic bacteria, always maintain the best biological activity and environment adaptability, its ability to remove the animal and plant oil is much higher than common strains.


Increase microbial biomass, and improve the biological activity.
Reduction of grease and grease accumulation.
Less obvious, less smelly.
Raise your paraffin production.
Rapid recovery with toxic substances or shock after treatment efficiency low system.
Improve the removal efficiency of BOD and COD and the performance of sludge settling.

Scope of application

Suitable for oil and sludge degradation and anaerobic wastewater system.

Description Of Products

Number of effective live bacteria
 
Number of effective live bacteria≥2×108cfu/g
 
Product characteristics and specifications
 
Aluminum foil bag packaging, liquid and solid products should be free of obvious impurities, solid products should have water absorption.
The net weight is 454 grams.
 
Expiration date
 
The expiration date of the product is 2 years if the storage and transportation conditions are up to specification, the packaging are complete, the seal is not opened.
 
Storage method
 
This product should be stored in a cool, dry and ventilated warehouse, shall not be deposited in the open air to prevent the rain, humidity, sunlight and high temperature over 40℃. Storage with toxic, harmful and corrosive substances is strictly prohibited.

Use instructions

Method of use
 
Stir and activate the product proportionally (one bag of product mixed with 10L water) with water. Dosage: 5-50g/m3. The detailed usage is in accordance with the specific scheme provided by BIOFORM.
 
Operation parameter
 
If there are any special cases, please communicate with our professional staff before using. Special cases include but are not limited to the large amount of toxic substances, unknown organisms and high concentration in water quality.
The test results show that the following physical and chemical parameters are more effective for bacterial growth:
 
pH: the ideal pH value is 7.0-8.0.
Temperature: the ideal temperature value is 26-32℃.
Dissolved oxygen: the dissolved oxygen in anaerobic tank is less than 0.2 mg/L, the dissolved oxygen in anoxic tank is 0.5 mg/L, and the dissolved oxygen in aerobic tank is 2-4 mg/L.
Trace elements: many elements such as potassium, iron, calcium, sulfur, and magnesium, are required for the growth of a proper family of bacteria. Usually the soil and water source will contain the above sufficient amount of elements.
Salinity: applicable to both sea water and fresh water and can withstand salinity up to 40‰
Poison resistance: effectively resist chemical toxic substances, including chloride, cyanide and heavy metals
Note: when microbicides are present in contaminated areas, their effects on microorganisms should be studied in advance.

  National Service Hotline: 400-608-6866      Online consultation

Package product

Applications

400 Phone

Consult now

Home