BIOFORM®Marine Environment_Bio-Form Biotechnology (Guangdong) Co., Ltd.

HOME > Product > Microbial Agent > Sewage Treatment > removal of COD >

BIOFORM®Marine Environment

BIOFORM®Marine Environment contains a large amount of highly efficient microbial bacteria that apply to high salinity and oil and chemical contaminants. Petroleum compounds, phenol, polycyclic aromatic hydrocarbons, sulfide, ethanol and similar organic compounds can be effectively degraded by BIOFORM®Marine Environment.

Strengthen organic pollutants removal efficiency of biochemical system, guarantee the BOD, COD and TSS effluent standards of waste water in the high salt environment.
Enhance the sludge sedimentation performance effectively in great fluctuation of water load, preventing sludge floating.
Launch new biochemical system quickly and restore collapse system.
Improve biochemical system in cold season.
Withstand the shock of sulfide.
Restore the nitrification capacity of the system in a low toxic state.
Improve the system gives water quality.
Reduce the consumption of chemical drugs to reduce the cost of doing so.
Inhibit the growth of filamentous bacteria effectively.

Scope of application

Suitable for treating oil refining, chemical industry and high salt waste water.

Description Of Products

Number of effective live bacteria

Number of effective live bacteria≥2×108cfu/g

Product characteristics and specifications

Aluminum foil bag packaging, liquid and solid products should be free of obvious impurities, solid products should have water absorption.

The net weight is 454 grams.

Expiration date

The expiration date of the product is 2 years if the storage and transportation conditions are up to specification, the packaging are complete, the seal is not opened.

Storage method

This product should be stored in a cool, dry and ventilated warehouse, shall not be deposited in the open air to prevent the rain, humidity, sunlight and high temperature over 40℃. Storage with toxic, harmful and corrosive substances is strictly prohibited.

Use instructions

Method of use

Stir and activate the product proportionally (one bag of product mixed with 10L water) with water. Dosage: 5-50g/m3. The detailed usage is in accordance with the specific scheme provided by BIOFORM.

Operation parameter

If there are any special cases, please communicate with our professional staff before using. Special cases include but are not limited to the large amount of toxic substances, unknown organisms and high concentration in water quality.

The test results show that the following physical and chemical parameters are more effective for bacterial growth:

pH: the ideal pH value is 7.0-8.0.

Temperature: the ideal temperature value is 26-32℃.

Dissolved oxygen: the dissolved oxygen in anaerobic tank is less than 0.2 mg/L, the dissolved oxygen in anoxic tank is 0.5 mg/L, and the dissolved oxygen in aerobic tank is 2-4 mg/L.

Trace elements: many elements such as potassium, iron, calcium, sulfur, and magnesium, are required for the growth of a proper family of bacteria. Usually the soil and water source will contain the above sufficient amount of elements.

Salinity: applicable to both sea water and fresh water and can withstand salinity up to 60‰

Poison resistance: effectively resist chemical toxic substances, including chloride, cyanide and heavy metals

Note: when microbicides are present in contaminated areas, their effects on microorganisms should be studied in advance.