BIOFORM®Microtherm Activated Sludge_Bio-Form Biotechnology (Guangdong) Co., Ltd.

HOME > Product > Microbial Agent > Sewage Treatment > removal of COD >

BIOFORM®Microtherm Activated Sludge

BIOFORM®Microtherm Activated Sludge is suitable for the system of low temperature biological efficiency of municipal wastewater (cold season). It contains a variety of highly efficient microbial bacteria, all of which are extracted and screened out from the nature. They can play the best role in aerobic and anaerobic environments, and can degrade proteins, fats, carbohydrates, hydrocarbons and other organic substances.
In order to rapidly increase the biomass in the biochemical tank, the BIOFORM®Microtherm Activated Sludge is rich in selected nutrients and promoters.

Launch system quickly.
Avoid efficiency decreases caused by cold season, recovery processing effect rapidly.
Control oil, foam or scum, eliminate odor.
Reduce sludge and improve sludge settling performance.
Inhibite the growth of filamentous bacteria by using bacteria with fast growth rate and strong competitiveness.

Scope of application

Suitable for the treatment of animal grease wastewater, municipal sewage and cold season sewage system.

Description Of Products

Number of effective live bacteria

Number of effective live bacteria≥2×108cfu/g

Product characteristics and specifications

Aluminum foil bag packaging, liquid and solid products should be free of obvious impurities, solid products should have water absorption.

The net weight is 454 grams.

Expiration date

The expiration date of the product is 2 years if the storage and transportation conditions are up to specification, the packaging are complete, the seal is not opened.

Storage method

This product should be stored in a cool, dry and ventilated warehouse, shall not be deposited in the open air to prevent the rain, humidity, sunlight and high temperature over 40℃. Storage with toxic, harmful and corrosive substances is strictly prohibited.

Use instructions

Method of use

Stir and activate the product proportionally (one bag of product mixed with 10L water) with water. Dosage: 5-50g/m3. The detailed usage is in accordance with the specific scheme provided by BIOFORM.

Operation parameter

If there are any special cases, please communicate with our professional staff before using. Special cases include but are not limited to the large amount of toxic substances, unknown organisms and high concentration in water quality.

The test results show that the following physical and chemical parameters are more effective for bacterial growth:

pH: the ideal pH value is 7.0-8.0.

Temperature: the ideal temperature value is 26-32℃.

Dissolved oxygen: the dissolved oxygen in anaerobic tank is less than 0.2 mg/L, the dissolved oxygen in anoxic tank is 0.5 mg/L, and the dissolved oxygen in aerobic tank is 2-4 mg/L.

Trace elements: many elements such as potassium, iron, calcium, sulfur, and magnesium, are required for the growth of a proper family of bacteria. Usually the soil and water source will contain the above sufficient amount of elements.

Salinity: applicable to both sea water and fresh water and can withstand salinity up to 40‰

Poison resistance: effectively resist chemical toxic substances, including chloride, cyanide and heavy metals

Note: when microbicides are present in contaminated areas, their effects on microorganisms should be studied in advance.